Temperature and humidity Controller with LCD, 2 relays and Sensor

Temperature and humidity control module switch, automatic constant temperature and humidity control instrument panel parameters: Name: Temperature / Humidity Controller Model: XY-TR01 Humidity range: 0%~100%RH Temperature range: -20~60 degrees Control accuracy: 0.1 degrees / 0.1% RH Detection probe: integrated sensor Output type: relay output Output capacity: up to 10A Size: 57*60*20mm Product Features: Temperature function: the working mode is automatically recognized, The system automatically recognizes the operating mode based on the start/stop temperature Start temperature > stop temperature, cooling mode 'C'; start temperature < stop temperature, heating mode 'H'. Cooling mode When the temperature > start temperature is detected, the relay is turned on, the red indicator light is on, and the refrigeration device starts to work; When the temperature is detected start temperature is detected, the relay is turned off, the red indicator light is off, and the heating device stops working; Temperature correction function OFE (-10 ~ 10 degrees) If the system works for a long time, there may be deviations and it is difficult to correct this power; Actual temperature = measured temperature + calibration value How to set the start/stop temperature: 1. In the running interface, long press the 'TM+' button for more than 3s to enter the startup temperature setting interface. The test can modify the parameters through the TM+/TM- key. After the parameter modification is completed, wait for 6s to automatically exit and save; 2. In the running interface, long press the 'TM-' button for more than 3s to enter the stop temperature setting interface. The test can modify the parameters through the TM+/TM- key. After the parameter modification is completed, wait for 6s to automatically exit and save. Humidity function: 1, the working mode is automatically recognized The system automatically recognizes the working mode according to the starting humidity/stop humidity. Start humidity > stop humidity, dehumidification mode 'D'; start humidity < stop humidity, humidification mode 'E' Dehumidification mode When detecting humidity > starting humidity, the relay is turned on, the green indicator light is on, and the dehumidification device starts to work; When the detection temperature starting humidity, the relay is turned off, the green indicator light is off, and the humidifying device stops working; 4, humidity correction function RH (-10~10 degrees) If the system works for a long time, there may be deviations and it is difficult to correct this power; Actual humidity = measured humidity + calibration value How to set the start/stop humidity: 1. In the running interface, press and hold the 'RH+' button for more than 3s to enter the startup humidity setting interface. The test can modify the parameters through the RH+/RH- key. After the parameter modification is completed, wait for 6s to automatically exit and save. 2. In the running interface, press and hold the 'RH-' button for more than 3s to enter the stop humidity setting interface. The test can modify the parameters through the RH+/RH- key. After the parameter modification is completed, wait for 6s to automatically exit and save.