MKS DET outage detection module

Product Introduction :

1.  Connect the power input terminal(blue)  of outage detection module,
    as well as UPS to 220V(or 110V) power.
2.  Connect the signal output terminal(3pins)  of outage detection modul
    to MKS TFT (PB0-->B0 Gnd-->- 3.3V-->+)
3.  After MKS TFT receive outage message, it will automatically   enter into
   printing  suspending  status. And the printer head will move from the model .
4.  MKS TFT carries with function of outage continued  printing.
   But it only saves  printing state if suddenly suffers from power cut.
   And the printer head cannot move .
Luckily , using outage detection module and UPS can totally handle
this problem .Moreover , UPS only cost 1min .
 

It will generate 220V voltage when  input the module