Ajax Wireless flood detector

LeaksProtect Wireless flood detector detects first signs of leakage within milliseconds. It is installed without using tools. Authentication to prevent forgery Jamming detection and communication channels encryption Two-way communication Raises the alarm as soon as water gets on one of the four pairs of contacts Registers when the area dries out and cancels the alarm The detector mounts by placing on the floor in areas of possible water inflow Principle of operation The device detects first signs of flooding as soon as water gets on one of the four pairs of contacts on the bottom of the detector. Features The device has IP65 enclosure protection, meaning it is completely protected against dust and moisture. Installation and set up It can be installed in just one minute. The detector only has to be placed on the floor under a washing machine, dishwasher, bathtub or heating radiator. Classification Radio channel smoke detector with temperature sensor and built-in siren Type of detector Wireless Installation method Indoors Compatibility Operates with all Ajax hubs, range extenders, ocBridge Plus, uartBridge Sensing element Photoelectric, CO and temperature sensors Activation threshold +59°С ±2°С Type of notification Sound/light Volume of built-in siren 85 dB Alarm signal delivery time 0.15 s False alarm filter + Interconnected alarms + Power supply Battery: Two CR2 batteries, 3 V Backup battery: CR2032 Battery life Up to 4 years Jeweller radio technology Communication range with central unit — up to 1,300 m in an open space Two-way communication between devices Operating frequencies — 868.0-868.6 MHz Self-adjusting RF output power — up to 20 mW Block encryption based on AES algorithm Detector polling period — 12−300 s Additional temperature sensor Available Operating temperature range From 0°С to +65°С Permissible humidity Up to 80% Anti-sabotage Protection against fraud Jamming detection Tamper-resistant Remote setting and testing + Dimensions 132 × 132 × 31 mm Weight 220 g Complete set FireProtect Plus detector SmartBracket mounting panel 2 x CR2 batteries (pre-installed) 1 x backup battery CR2032 (pre-installed) Installation set User’s guide