RFID Reader Writer Copier Duplicator IC/ID for 125Khz 13.56Mhz

Description : This machine only supports 125khz, 250khz, 375khz, 500khz, 625khz, 750khz, 875khz, 1M, HID-125khz, 13.56mhz (ic mode) read and copy, supports most IC encryption card decryption (but not all), does not support Copy CUID and FUID chip cards, do not support cards with power supply How to Crack encryption 13.56Mhz cards: Please read it carefully and follow the steps as below: When the 13.56mhz cards have encrypted,it should be using the software to crack the cards. Conneted with copier with computer via USB cable, then Press the "on/off" button, then the copier will be show the "Disclaimer"page, NOT press any button on the Copier, then your computer will show a removeable disk, open the disk, there are the manual and the software, Press the button "OK" to agree with the Disclaimer on the computer fistly, then argee with the copier's "Disclaimer"page, that's will be connect successfully, put your original cards on the back side of the Read/Write area, then press the button "scan"to crack the passwords, after 2 or 5 minutes,the passwords will be cracked successfully, then put one UID cards in the read/write area, then press"write"button, that will be ok. How to copy the 125khz RFID cards: Press the "on/off "button, put the original 125khz cards on the back of the copier, then the copier will be show the "Disclaimer"page, Press "ok" button, then put the cards on the back side of the copier, then press"scan", then the copier will auto scan it is 125khz cards, and the copier will show the card number, then we put one writable EM4305 key on the back side of the copier, then press"Write",