Retour à la recherche
CH341A USB to I2C/IIC/SPI/UART/TTL/ISP Serial adapter
Voir sur le site du vendeurLes prix et la disponibilité sont mis à jour quotidiennement. Veuillez vérifier sur le site du vendeur avant d'acheter.
Tiah

CH341A USB to I2C/IIC/SPI/UART/TTL/ISP Serial adapter

Sensors & modules

DZD 5 000

Voir sur le site du vendeurLes prix et la disponibilité sont mis à jour quotidiennement. Veuillez vérifier sur le site du vendeur avant d'acheter.
Description

CH341A USB to I2C/IIC/SPI/UART/TTL/ISP Serial adapter (EPP/MEM)

Features: 

·                Product Features: CH341A USB control chip inside

·                Full-speed USB interface, compatible with USB V2.0, the design of the standard USB-A male;

·                Computer USB power supply, the simulation standard serial, used to upgrade serial peripherals, additional serial port or via USB;

·                Supports 3.3V and 5V TTL target system, the serial application is fully compatible with the computer-side under the Windows operating system;

·                Support for 5, 6, 7 or 8 data bits, odd parity, even parity, blank, signs, and no parity;

·                Support for serial port to send to enable serial receive ready transmission rate control signal and MODEM liaison signal;

·                By adding level converter module, RS232, RS485, interface; (supporting modules for sale)

·                Provide two parallel port interface mode: EPP mode and MEM mode; USB to parallel port can be used for simple digital I / O control;

·                Support for a variety of serial communication mode, UART, I2C, SPI;

·                Supports 2-wire and 4-wire synchronous serial interface, I2C supports four kinds of transmission speed;

·                The perfect support for the STC the MCU download and debugging STC official recommended program;

·                Support for out output voltage, selectable 3.3V 5V or not output;

·                Support the work status indicators;

·                Dual interface output;

·                Hardware full-duplex serial port, built-in send and receive buffer, and support the communication baud rate 50bps ~ 2Mbps.

·                Support WINDOWS 98/ME/2000/XP/server 2003/VISTA/server 2008/WIN 7/64/32-bit.


Applications:

Simulation of the standard serial port for the upgrade serial peripherals, additional serial port or via USB.
Need to use I2C, SPI, UART, TTL serial and other occasions;
Electronics Engineers debugging download;
Avariety of hardware systems, software system debugging;
Serial Brush;

Produits similaires

5inch ESP32 Module ESP32-2432S028R with Touch
Voir
5inch ESP32 Module ESP32-2432S028R with Touch
DZD 18 900

Sensors & modules

Tracking sensor module KY033
Voir
Tracking sensor module KY033
DZD 250

Sensors & modules

Tiah